ek civic rear disk conversion
The rear drum brakes on a 1996-2000 Honda Civic can be converted to disc brakes using a few different methods. Here are the steps for one possible method:
Obtain the necessary parts: You will need a set of rear disc brake calipers, rotors, and pads from a Honda Civic Si (1999-2000 model year) or Acura Integra (1994-2001 model year). You will also need brake hoses and brake line adapters that are compatible with the calipers.
Remove the rear drums: Jack up the rear of the car and remove the wheels. Use a socket wrench to remove the drum retaining screws and pull off the drums.
Remove the drum brake components: Remove the brake shoes, springs, and hardware from both sides of the car.
Install the new calipers: Bolt the new calipers onto the rear knuckles, using the appropriate mounting bolts and torque specifications.
Install the new rotors: Slide the new rotors onto the hub and secure them with the appropriate bolts.
Install the new brake pads: Insert the new brake pads into the calipers, making sure they are seated correctly.
Install the brake hoses: Attach the brake hoses to the calipers, using the brake line adapters if necessary.
Bleed the brakes: Bleed the brake system to remove any air bubbles and ensure proper brake operation.
Test the brakes: Test the new rear brakes by pressing the brake pedal several times and checking for proper operation.
Note: This process may require some modification or additional steps depending on the specific components used and the condition of the vehicle. It is recommended to consult a professional mechanic or reference a detailed guide for more specific instructions.