dodge charger rally stripes
The Dodge Charger is a classic muscle car that looks great with rally stripes. Rally stripes are a racing stripe design that goes from the hood to the trunk of the car. They can be a single stripe or multiple stripes and can come in a variety of colors.
To get rally stripes on your Dodge Charger, you have a few options. You can have a professional installer do it for you, or you can do it yourself if you have some experience with vinyl wrapping. Here are the steps to do it yourself:
Clean the surface of your Charger: Before applying the stripes, make sure the surface is clean and free of any dirt or debris. Use a soap and water mixture to clean it, and then dry it thoroughly.
Measure and mark the stripes: Measure the width of the stripes you want, and then mark the center of the hood and trunk. Use painter's tape to create a straight line between the two marks.
Apply the vinyl: Use a squeegee to apply the vinyl to the car. Start at the center of the hood and work your way outwards. Be sure to smooth out any air bubbles as you go.
Trim the vinyl: Use a sharp knife to trim the excess vinyl from the edges of the stripes. Be careful not to cut into the paint.
Repeat for the other side: Once you have completed one side of the car, repeat the process on the other side.
Finish the edges: Use a heat gun or hair dryer to heat up the vinyl at the edges of the stripes. This will help them conform to the shape of the car.
That's it! With a little patience and attention to detail, you can have a great looking set of rally stripes on your Dodge Charger.